Mini Spider2018-04-12T11:57:15+00:00

MINI

SPIDER

It’s the lightest weight and most compact Pole Operated Pantograph in the market for  30 kg. lifting capacity, with exceptional stability of the movable part.

A Manual Suspension with exclusive Special Fiber Pantograph Arms, a built in cable management system and TOP/BOTTOM  offset load Stabilizers, the MINI SPIDER is a unique New product for stable support of the Lighting fixture.
The special Shape of the Arms provide additional stability to the moving part of the pantograph, yet the fact that they are built in a special structural fiber material make this pantograph the lightest weight in the industry (the Self weight of a 4 m. net extension MINI SPIDER, for 6 m. hanging heights, complete with Mains and DMX Load circuits is only 11,5 kg.).

It’s the lightest weight and most compact Pole Operated Pantograph in the market for  30 kg. lifting capacity, with exceptional stability of the movable part.

A Manual Suspension with exclusive Special Fiber Pantograph Arms, a built in cable management system and TOP/BOTTOM  offset load Stabilizers, the MINI SPIDER is a unique New product for stable support of the Lighting fixture.
The special Shape of the Arms provide additional stability to the moving part of the pantograph, yet the fact that they are built in a special structural fiber material make this pantograph the lightest weight in the industry (the Self weight of a 4 m. net extension MINI SPIDER, for 6 m. hanging heights, complete with Mains and DMX Load circuits is only 11,5 kg.).

The Mini SPIDER is a Pole Operated Pantograph, featuring a unique scissor arm assembly with a patented stabilizing system built in a special structural fiber material, in order to provide a steady support for the lighting fixtures and allowing also the assembling of an horizontal pipe or rail at bottom to hang more than one instrument.

The following are the Mini SPIDER main features:

  • 30 kg. S.W.L. (Safe Working Load) which is the maximum net lifting capacity of the machine, with Static and Dynamic Self Sustaining Gearbox, having costant resisting Torque, for either Manual or Motorized Pole activation
  • 2 independent STAINLESS METAL BANDS 20×0,3 cross section, minimum breaking load per band 948 kg. Rounded edges
  • Mechanical TOP and BOTTOM Limits, Scissor Arms Stabilization and PATENTED STABILIZING GEARED Hinges to reduce Lateral sway and permit off centred loading
  • Structural Fiber SCISSOR ARMS for stability of the moving part and minimized self- weight of the pantograph. Each hinge is junction by screws, self-locking nuts and brass spacing rims for accurate control and functionality
  • Bottom moving part with 1 circuit 20A POWERCON and 1 DMX on XLR5P. Electrical Cables are contained within the Scissor Arm for protection and to minimize the bending stress on the conductors
  • Very Small Height occupancy when fully retracted, to maximize the studio height use
  • Two Types of NET VERTICAL EXTENSION:
    – Type1=2m.(appropriateforaFixingheightofmax.4m.) Closed Dimension, 63m
    – Type2=4m.(appropriateforaFixingheightofmax.6m.) Closed Dimension, 72m
  • Either B.S. or DIN Spigot at TOP and Receiver at bottom
  • Easy install of “D” RAIL OR 48 mm. DIAMETER PIPE of maximum 1 m. length at bottom, for multiple fixtures hanging on the Mini SPIDER.
  • Safety Certified by TUV
DESCRIPTIONVALUE
S.W.L.
Safe Working Load (net lifting capacity)
30 kg. / 66 Lbs.
Self WeightType 1 = 2 m. / 11,5 kg.
Type 2 = 4 m. / 14 kg.
Model Numbers for
B.S. Versions
Type 1 = 2 m. / 8120.120
Type 2 = 4 m. / 8120.140
Model Numbers for DIN VersionsType 1 = 2 m. / 8120.320
Type 2 = 4 m. / 8120.340
Winch GEAR BOXTransmission Ratio 1:80 Automatic Interlock: SD Static and Dynamic Self Sustaining
Nominal Output Torque 35 Nm
Vertical movement per turn of Activation Ring19 mm.
Stainless steel FLAT Bands / Lifting lines2 Bands
Cross Section 10x0.3 mm. with Round Edges. Min. RESISTANCE = 1.550 N/mm2
Min. BREAKING LOAD each = 474,3 kg SAFETY FACTOR each> 22 TIMES
Electrical Circuits1 Mains 20A and 1 DMX circuits with 1,5 mt. cable tails at top
with the following connection stds:
- 3x1,5mm2 with 1x20A POWERCON - 1 DMX 2x0,22+shield with XLR5P

(mm – inch)

CODEDESCRIPTION
DGP-427B-4,0MANUAL LIGHTING OPERATING POLE
- Aluminium Sections (Black colour) - Top Hook with ISULATED SPACER - 4 Sections, 3 risers
- Min. Length 1,6 m.
- Max. Length 4 m.
- Dismountable Crank Handle - Closed Length 1,42 m.
DGP-427B-6,5MANUAL LIGHTING OPERATING POLE - Aluminium Sections (Black colour)
- Top Hook with ISULATED SPACER
- 4 Sections, 3 risers
- Min. Length 2,2 m.
- Max. Length 6,5 m.
- Dismountable Crank Handle - Closed Length 2 m.
HBDTKBATTERY DRIVE TOOL KIT for MOTORISED POLE, includes:
- 1 Hilti TRANPORT CASE
- 1 Hilti BATTERY POWER TOOL including:
- ADJUSTABLE TORQUE LIMITER - SELECTABLE MAXIMUM SPEED - 1 BATTERY fitted as STANDARD
- 1 SPARE BATTERY
- 1 BATTERY CHARGER - 1 BIT with HOOK
DGP-427B-4,0- MPOPERATING POLE for MOTORIZED TOOL HBDTK
- Aluminium Sections (Black colour) - Top Hook with ISULATED SPACER - 4 Sections, 3 risers
- Min. Length 1,45 m.
- Max. Length 4 m.
- Shaped Ring at bottom for fast connection of Battery Powered drive unit - Closed Length 1,45 m.
326.200OPERATING POLE for MOTORIZED TOOL HBDTK
- Aluminium Sections (Black colour) - Top Hook with ISULATED SPACER - 4 Sections, 3 risers
- Min. Length 2,2 m.
- Max. Length 6,5 m.
- Shaped Ring at bottom for fast connection of Battery Powered drive unit - Closed Length 2 m.
91.200Solid brass "C" clamp
to hang fixtures overhead and for mounting on pipe with diameters up to 52 mm. (2"), with Locking Knob and safety pin (no adapters)
20.100Safety cable 800 mm. (3 feet) long
with 4 mm. diameter steel rope and safety catch.